Service graphs

daily graph weekly graph
monthly graph yearly graph

Graph Information

This graph shows the value of all S.M.A.R.T attributes of drive sdf (Micron_5300_MTFDDAK480TDS). smartctl_exit_status is the return value of smartctl. A non-zero return value indicates an error, a potential error, or a fault on the drive.

Field Internal name Type Warn Crit Info
Raw_Read_Error_Rate Raw_Read_Error_Rate gauge   050:   
Reallocated_Sector_Ct Reallocated_Sector_Ct gauge   001:   
Power_On_Hours Power_On_Hours gauge   000:   
Power_Cycle_Count Power_Cycle_Count gauge   001:   
Reserved_Block_Pct Reserved_Block_Pct gauge   010:   
Program_Fail_Count Program_Fail_Count gauge   000:   
Erase_Fail_Count Erase_Fail_Count gauge   001:   
Avg_Block_Erase_Count Avg_Block_Erase_Count gauge   000:   
Unexpect_Power_Loss_Ct Unexpect_Power_Loss_Ct gauge   000:   
SATA_Int_Downshift_Ct SATA_Int_Downshift_Ct gauge   000:   
End_to_End_Error End_to_End_Error gauge   000:   
Reported_Uncorrect Reported_Uncorrect gauge   000:   
Command_Timeout Command_Timeout gauge   000:   
Temperature_Celsius Temperature_Celsius gauge   000:   
Hardware_ECC_Recovered Hardware_ECC_Recovered gauge   000:   
Reallocated_Event_Count Reallocated_Event_Count gauge   000:   
Current_Pending_Sector Current_Pending_Sector gauge   000:   
Offline_Uncorrectable Offline_Uncorrectable gauge   000:   
UDMA_CRC_Error_Count UDMA_CRC_Error_Count gauge   000:   
Percent_Lifetime_Remain Percent_Lifetime_Remain gauge   001:   
Write_Error_Rate Write_Error_Rate gauge   000:   
Total_LBAs_Written Total_LBAs_Written gauge   000:   
Host_Program_Page_Count Host_Program_Page_Count gauge   000:   
Bckgnd_Program_Page_Cnt Bckgnd_Program_Page_Cnt gauge   000:   
Unused_Rsvd_Blk_Cnt_Tot Unused_Rsvd_Blk_Cnt_Tot gauge   000:   
RAIN_Success_Recovered RAIN_Success_Recovered gauge   000:   
Integ_Scan_Complete_Cnt Integ_Scan_Complete_Cnt gauge   000:   
Integ_Scan_Folding_Cnt Integ_Scan_Folding_Cnt gauge   000:   
smartctl_exit_status smartctl_exit_status gauge 1